- DIY
- E-Component
- Electrics
- Measuring
- Thermo
- Control
- Embedded
- Module
- Tools
- Sensors
- CNC & Robot
- New Products
-
All brands
- Kaifeng
- 3M
- ACP
- Alps
- ARIO
- Atmel
- Autonics
- AY-KA
- Brennenstuhl
- Carlo Gavazzi
- Delta Electronics
- Filotronix
- GDSTIME
- General Semiconductors
- Goot
- Halnziye
- Hitachi
- Infineon
- international rectifier corp
- Kefa
- Kingbright
- Kyoritsu
- Mabuchi motors
- Matsushita
- Maxim
- Microchip
- Motorola
- National Semiconductor
- Nextron
- Nichicon
- Nippon Chemi-Con
- OBO
- Omron
- Panasonic
- Phoenix Contact
- Piher
- Rubycon
- Scame
- Schurter
- SEP
- SGE
- Sharp
- Smart Sensor
- ST
- Texas instruments
- TNI-U
- Toshiba
- Total
- UNI-T
- Weidmuller
- WOER
- Best sales
- All in-stock
ATMEGA32A-PU 8-bit AVR with 32KBytes of ISP Flash
EGP275.00
Tax included
2 business days
8-bit AVR Microcontroller with 32K Bytes In-System Programmable Flash
Device Overview
The low power, high performance Microchip 8-bit AVR RISC-based microcontroller featuring 32KB self-programming flash program memory, 2KB SRAM, 1KB EEPROM, 8 channel 10-bit A/D converter and JTAG interface for on-chip-debug. The device acheives 16 MIPS throughput at 16 MHz at 2.7-5.5V operation.
By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, allowing you to optimize power consumption versus processing speed.
Parametrics
Program Memory Type: Flash
Program Memory Size (KB): 32
CPU Speed (MIPS/DMIPS): 16
SRAM (KB): 2,048
Data EEPROM/HEF (bytes): 1024
Digital Communication Peripherals: 1-UART, 1-SPI, 1-I2C
Capture/Compare/PWM Peripherals: 1 Input Capture, 1 CCP, 4PWM
Timers: 2 x 8-bit, 1 x 16-bit
Number of Comparators: 1
Temperature Range (°C): -40 to 85
Operating Voltage Range (V): 2.7 to 5.5
Pin Count: 40
Security policy
Delivery policy
Return policy
3 other products in the same category:
8-bit AVR Microcontroller with 32K Bytes In-System Programmable Flash
Device Overview
The low power, high performance Microchip 8-bit AVR RISC-based microcontroller featuring 32KB self-programming flash program memory, 2KB SRAM, 1KB EEPROM, 8 channel 10-bit A/D converter and JTAG interface for on-chip-debug. The device acheives 16 MIPS throughput at 16 MHz at 2.7-5.5V operation.
By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, allowing you to optimize power consumption versus processing speed.
Parametrics
Program Memory Type: Flash
Program Memory Size (KB): 32
CPU Speed (MIPS/DMIPS): 16
SRAM (KB): 2,048
Data EEPROM/HEF (bytes): 1024
Digital Communication Peripherals: 1-UART, 1-SPI, 1-I2C
Capture/Compare/PWM Peripherals: 1 Input Capture, 1 CCP, 4PWM
Timers: 2 x 8-bit, 1 x 16-bit
Number of Comparators: 1
Temperature Range (°C): -40 to 85
Operating Voltage Range (V): 2.7 to 5.5
Pin Count: 40